Jiangsu Bealloy Co.,Ltd produce special alloy products, including Bar, Rod, Sheet, Plate, Pipe, Tube, Pipe Fittings, Rings, Forgings, Flange, Coil and Strip, etc. If any requirements not found, please email us sales@bealloy.com. We will offer you best price and more details. Any customizationare accepted.
16nNiCrS4 is a high-strength low-alloy structural steel. Due to its proper hardenability, the microstructure is uniform sorbite, bainite or very fine pearlite after heat treatment. Therefore, it has higher tensile strength and yield strength ratio (generally around 0.85), higher toughness and fatigue strength, and lower toughness brittleness transition temperature.
Standard: EN 10084 : 2008
| C | Si | Mn | S | P | Cr | Ni |
| 0.13 - 0.19 | max 0.4 | 0.7 - 1.0 | 0.020 - 0.040 | max 0.025 | 0.6 - 1.0 | 0.8 - 1.1 |
In what applications is 16NiCrS4 used?
16NiCrS4 can be used to make section ruler Large machine parts.
-
Duplex Super Stainless
- Duplex 2205/ S31803/1.4462/F51
- Duplex 2507 / S32750 / 1.4410 /F53
- Duplex S32760 / 1.4501 / F55
- 904L / UNS N08904 / 1.4539
- 253 MA / S30815 / 1.4835
- 254 SMO / S31254 /1.4547
- 17-4PH / AISI630 / 1.4542
- AISI 316Ti / 1.4571
- 317L Stainless Steel
- AISI 310MOLN / 1.4466 Stainless Steel
- 347/347H 1.4550 Stainless Steel
- UNS N08367 / AL-6XN® / 1.4529
- Nickel Based Alloys
- Stainless Steel
- Alloy Steel
- TITANIUM AND TITANIUM ALLOYS