Experienced supplier of Stainless Steel Bar Rod Forgings

Home > Product > Stainless Steel > Bar Rod > Stainless Steel Bar Rod Forgings

Stainless Steel Bar Rod Forgings

Material Grade
Details
Packages

美标牌号 ASTM/ASME Grade	欧标代码 EN Grade	国标统一数字代号 GB Unified Number	Chemical Component %
美标牌号 ASTM/ASME Grade	欧标代码 EN Grade	国标统一数字代号 GB Unified Number	C	Cr	Ni	Mn	P	S	Mo	Si	Cu	N	Other
201	1.4372	1Cr17Mn6Ni5N	≤0.15	16.00-18.00	3.50-5.50	5.50－7.50	≤0.060	≤0.030	-	≤1.00	-	≤0.25	-
202	1.4373	1Cr18Mn8Ni5N	≤0.15	17.00-19.00	4.00-6.00	7.50-10.00	≤0.060	≤0.030		≤1.00	-	≤0.25	－
301	1.4310	1Cr17Ni7	≤0.15	16.00-18.00	6.00-8.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	0.1	-
302	1.4325	1Cr18Ni9	≤0.15	17.00-19.00	8.00-10.00	≤2.00	≤0.035	≤0.030	-	≤1.00	-	-	-
303	1.4305	Y1Cr18Ni9	≤0.15	17.00-19.00	8.00-10.00	≤2.00	≤0.20	≥0.15	-	≤1.00	-	-	-
304	1.4301	0Cr18Ni9	≤0.08	18.00-20.00	8.00-10.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	-	-
304L	1.4307	00Cr19Ni10	≤0.030	18.00-20.00	8.00-10.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	-	-
304H	1.4948	0Cr18Ni9	0.04~0.10	18.00-20.00	8.00-10.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	-	-
309S	1.4833	0Cr23Ni13	≤0.08	22.00-24.00	12.00-15.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	-	-
309	1.4828	0Cr23Ni13	0.04~0.10	22.00-24.00	12.00-15.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	-	-
310S	1.4842	0Cr25Ni20	≤0.08	24.00-26.00	19.00-22.00	≤2.00	≤0.045	≤0.030	-	≤1.5	-	-	-
310H	1.4821	0Cr25Ni20	0.04~0.10	24.00-26.00	19.00-22.00	≤2.00	≤0.045	≤0.030	-	≤1.5	-	-	-
314	1.4841	0Cr25Ni20Si	≤0.25	23.00-26.00	19.00-22.00	≤2.00	≤0.045	≤0.030	-	1.5-3.0	-	-	-
316	1.4401	0Cr17Ni12Mo2	≤0.08	16.00-18.50	10.00-14.00	≤2.00	≤0.045	≤0.030	2.00-3.00	≤0.75	-	-	-
316L	1.4404	00Cr17Ni14Mo2	≤0.030	16.00-18.00	10.00-14.00	≤2.00	≤0.045	≤0.030	2.00-3.00	≤0.75	-	-	-
316H	1.4436	0Cr17Ni12Mo2N	0.04~0.10	16.00-18.00	10.00-14.00	≤2.00	≤0.045	≤0.030	2.00-3.00	≤0.75	-	0.10-0.22	-
316Ti	1.4571	0Cr17Ni12Mo2Ti	≤0.08	16.00-18.50	10.00-14.00	≤2.00	≤0.045	≤0.030	2.00-3.00	≤0.75	-	-	Ti5(C+N)~0.7
317	1.4445	0Cr19Ni13Mo3	≤0.08	18.00-20.00	11.00-15.00	≤2.00	≤0.045	≤0.030	3.00-4.00	≤0.75	-	0.1	-
317L	1.4438	00Cr19Ni13Mo3	≤0.03	18.00-20.00	11.00-15.00	≤2.00	≤0.045	≤0.030	3.00-4.00	≤0.75	-	0.1	-
321	1.4541	0Cr18Ni10Ti	≤0.08	17.00-19.00	9.00-12.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	0.1	Ti5(C+N)~0.7
321H	1.4940	0Cr18Ni10Ti	0.04~0.10	17.00-19.00	9.00-12.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	0.1	Ti4(C+N)~0.7
329	1.4480	0Cr26Ni5Mo2	≤0.08	23.00-28.00	2.00-5.00	≤1.00	≤0.040	≤0.030	1.00-2.00	≤0.75	-	-	-
329J1	1.4480	0Cr26Ni5Mo2	≤0.08	23.00-28.00	2.00-5.00	≤1.00	≤0.045	≤0.030	1.00-2.00	≤0.75	-	-	-
330	1.4864	N08330	≤0.15	14.00-17.00	33.00-37.00	≤2.00	≤0.045	≤0.040	1.00-2.00	≤1.5	-	-	-
347	1.4550	0Cr18Ni11Nb	≤0.08	17.00-19.00	9.00-13.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	-	Nb≥10*C%-1.0
347H	1.4912	0Cr18Ni11Nb	0.04~0.10	17.00-19.00	9.00-13.00	≤2.00	≤0.045	≤0.030	-	≤0.75	-	-	Nb≥8*C%-1.0
409L	1.4720	S40900	≤0.03	10.50-11.70	0.5	≤1.00	≤0.040	≤0.020	-	≤1.00	-	0.03	Ti6(C+N)-0.5 Nb0.17
430	1.4016	S43000	≤0.12	16.00-18.00	0.75	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
436	1.4513	S43600	≤0.025	16.00-19.00	-	≤1.00	≤0.040	≤0.030	0.75-1.0	≤1.00		≤0.025	Nb+Ti:8(C+N)~0.80
439	1.4510	S43035	≤0.030	17.50-18.50	-	≤1.00	≤0.040	≤0.015	-	≤1.00	-	≤0.030	Ti+Nb:0.2+4C~0.75
441	1.4509	S44100	≤0.030	17.50-18.50	-	≤1.00	≤0.040	≤0.015	-	≤1.00	-	≤0.030	Ti:0.1-0.6 Nb:3C+0.3~1.0
442	1.4741	S44200	≤0.025	18.0-23.0	-	≤1.00	≤0.040	≤0.035	-	≤1.00	-
443		S44300	≤0.025	19.5-22.0	-	≤1.00	≤0.035	≤0.015	-	≤1.00	-	≤0.025	Nb+Ti:0.2+4(C+N)~0.75
444	1.4521	S44400	≤0.025	17.00-20.00	-	≤1.00	≤0.040	≤0.030	1.75-2.5	≤1.00		≤0.035	Ti+Nb:0.2+4(C+N)~0.8
446	1.4749	S44600	≤0.2	23.0-27.0	0.75	≤1.50	≤0.040	≤0.030	-	≤1.00		0.25
410	1.4006	1Cr13	0.08~0.15	11.50-13.50	-	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
420	1.4031	2Cr13	≥0.15	12.00-14.00	-	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
420J2	1.4028	3Cr13	0.26-0.35	12.00-14.00	-	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
S42040	1.4034	4Cr13	0.36-0.45	12.00-14.00	-	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
431	1.4057	1Cr17Ni2	≤0.2	15.00-17.00	1.25-2.50	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
440A	1.4040	7Cr17	0.60-0.75	16.00-18.00	-	≤1.00	≤0.040	≤0.030	0.75	≤1.00	-	-	-
440B	1.4041	8Cr17	0.75-0.95	16.00-18.00	-	≤1.00	≤0.040	≤0.030	0.75	≤1.00	-	-	-
440C	1.4023	11Cr17	0.95-1.20	16.00-18.00	-	≤1.00	≤0.040	≤0.030	0.75	≤1.00	-	-	-
17-4PH	1.4542	630	≤0.07	15.50-17.50	3.00-5.00	≤1.00	≤0.040	≤0.030	-	≤1.00	3.00-5.00	-	Nb+Ta:0.15-0.45
17-7PH	1.4568	631	≤0.09	16.00-18.00	6.50-7.50	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	Al 0.75-1.50
15-5PH	1.4545	S15500	≤0.09	14.00-15.50	3.50-5.50	≤1.00	≤0.040	≤0.030	2.00-3.00	≤1.00	2.50-4.50	-
416	1.4005	Y1Cr13	≤0.15	12.00-14.00	-	≤1.25	≤0.06	≥0.15	-	≤1.00	-	-	-
420F	1.4029	Y3Cr13	0.3-0.40	12.00-14.00	0.5	≤1.25	≤0.06	≥0.15	-	≤1.00	0.6	-	-
430F	1.4019,1.4104	Y1Cr17	≤0.12	16.00-18.00	-	≤1.25	≤0.06	≥0.15	-	≤1.00	-	-	-
440F	1.4025	Y11Cr17	0.95-1.20	16.00-18.00	-	≤1.25	≤0.06	≥0.15	-	≤1.00	-	-	-
303	1.4305	S30317	≤0.15	17.00-19.00	8.00-10.00	≤2.00	≤0.20	≥0.15	-	≤1.00	-	-	-

Stainless Steel bars generally have the shapes such as flat, round, hexagonal, square and channel and on most of the occasions, it is the shape of the bar that defines its application area.It can be categorically said that steel bars are one of the core components of any manufacturing industry or for that matter any industry that relies on machineries.

SS Round bars: SS round bar is one of the most vital players in the machining industry. With the fabulous property of corrosion resistance, SS round bars are employed in manufacturing industries that are indulged in the production of fasteners and machineries.

SS Flat bar: Most of the flat bars find it application in construction industries in the form of base plates and brackets

SS Hexagonal bars: These weight bearing bars have their end use in construction industries with the possibility of tailor made sizes. It can be used as bridge, frame, fence, transmission ship, vehicle, fasteners etc..

SS Square bars: These are again from one of the popular categories that enjoy wide application in manufacturing industry pertaining to machineries, fasteners, and equipments.

SS Angle bars: Stainless steel angle bar is corrosion resistant and provides good mechanical properties, it’s used in the fabrication of I beams, H beams, C beams or any other major structural material, which makes it ideal for construction projects.

Applications:

• Frames

• Supports

• Fence

• Vehicle

• Construction

• Machinery

Bundle
Wooden Box
Flat
Wooden Case

Forging
UT
Cutting
Maching