Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc)
Share:
Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc) Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc)
Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc)
Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc)
Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc)
Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc)
Stainless Steel Coil/Strips (304 316L 321 309 310,201 etc)
  • Detail
  • Material
  • Finish

Stainless Steel Coil Strip Thickness:

Cold rolled:0.01mm-6mm

Hot rolled: 3.0mm-14mm

Width: 5mm-2000mm

Length: as customer requirement


Surface:

2B, BA, No.1,No.4,HL,No.8,Mirror etc Mirror, No.4, HL NSP, Bead Blast, Vibration,

HL Gold, Mirror Gold, Vibration Gold NSP No.4 Copper NSP, Mirror Copper, Bead Copper,

HL Brass, Mirror Brass, Bead Brass, HL Black, Mirror Black, Bead Black NSP,

HL Bronze, Mirror Bronze, Vibration Bronze,Mirror Etched, HL Etched Copper, Mirror Black Etched, Mirror Etched Gold.




Packing:

Packed and labeled according to the regulations and customer's requests.Great care is taken to avoid any damage which might otherwise be caused during storage or transportation.With wide experience and expertise, Jiangsu Bealloy Co.,Ltd is one of the leading stainless steel coil strip manufacturers and suppliers. We have hundreds of high-qualified workers at your service. Please rest assured to get the competitive price stainless steel coil strip with us.

Type Grade Grade Chemical Component %
C Cr Ni Mn P S Mo Si Cu N Other
Austenitic 201 SUS201 ≤0.15 16.00-18.00 3.50-5.50 5.50-7.50 ≤0.060 ≤0.030 - ≤1.00 - ≤0.25 -
202 SUS202 ≤0.15 17.00-19.00 4.00-6.00 7.50-10.00 ≤0.060 ≤0.030 ≤1.00 - ≤0.25
301 1.4310 ≤0.15 16.00-18.00 6.00-8.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - ≤0.10 -
304 1.4301 ≤0.07 17.00-19.00 8.00-10.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
304L 1.4307 ≤0.030 18.00-20.00 8.00-10.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
304H 1.4948 0.04-0.10 18.00-20.00 8.00-10.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
309 1.4828 ≤0.20 22.00-24.00 12.00-15.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
309S * ≤0.08 22.00-24.00 12.00-15.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
310 1.4842 ≤0.25 24.00-26.00 19.00-22.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.50 - - -
310S * ≤0.08 24.00-26.00 19.00-22.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.50 - - -
314 1.4841 ≤0.25 23.00-26.00 19.00-22.00 ≤2.00 ≤0.045 ≤0.030 - 1.50-3.00 - - -
316 1.4401 ≤0.08 16.00-18.50 10.00-14.00 ≤2.00 ≤0.045 ≤0.030 2.00-3.00 ≤1.00 - - -
316L 1.4404 ≤0.030 16.00-18.00 10.00-14.00 ≤2.00 ≤0.045 ≤0.030 2.00-3.00 ≤1.00 - - -
316Ti 1.4571 ≤0.08 16.00-18.00 10.00-14.00 ≤2.00 ≤0.045 ≤0.030 2.00-3.00 ≤1.00 - 0.1 Ti5(C+N)~0.70
317 * ≤0.08 18.00-20.00 11.00-15.00 ≤2.00 ≤0.045 ≤0.030 3.00-4.00 ≤1.00 - 0.1 -
317L 1.4438 ≤0.03 18.00-20.00 11.00-15.00 ≤2.00 ≤0.045 ≤0.030 3.00-4.00 ≤1.00 - 0.1 -
321 1.4541 ≤0.08 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - Ti5(C+N)~0.70
321H * 0.04-0.10 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - Ti5(C+N)~0.70
347 1.4550 ≤0.08 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - Nb≥10*C%-1.10
347H 1.494 0.04-0.10 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - Nb≥10*C%-1.10
xm-19 Nitronic50 ≤0.06 20.50-23.50 11.50-13.50 4.0-6.0 ≤0.045 ≤0.030 1.50-3.00 ≤1.00 - 0.2-0.4 Nb:0.10-0.30    V:0.10-0.30
904L N08904 ≤0.02 19.0-23.0 23.0-28.0 4.0-5.0 ≤0.045 ≤0.035 ≤1.00 0.1 Cu:1.0-2.0
Surface finish

Characteristics and application

2B

The surface brightness and flatness of no 2B is better than no2D. then through a special surface treatment to improve its  mechanic al properties,No2B could nearly satisfy comprehensive uses.

No.1

Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc.

No.4

Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc.

HL

Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc.

BA

Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc.

8K

The product have excellent brightness and prefer reflexivity can to be the mirror.

Product Catalog